Hayward GL-235 Solar Pool Heating Controller
The Hayward GL-235 Solar Pool Heating Controller provides differential temperature control for pool and spa solar heating systems. Its microprocessor-based design supports dependable operation, easy installation and serviceability, with automatic heating, selectable nocturnal cooling, a selectable high limit, programmable recirculation freeze protection and optional booster pump control.
Automatic solar heating and cooling
Heating: When the collectors are at least 4 degrees warmer than the pool water and the pool is below the desired temperature, the controller rotates the valve to collect heat. Heat collection stops when the solar sensor falls to within 1.5°F of the pool temperature or the pool exceeds the desired temperature setting.
Cooling, field-selectable: When the collectors are at least 6°F cooler than the pool water and the pool is above the desired temperature, the controller rotates the valve to allow cooling through the solar collectors. Cooling stops when the collectors rise to within 3°F of the pool temperature or the pool falls below the desired temperature setting.
Temperature settings and system indicators
A single dial sets the desired pool or spa temperature from 70°F to 104°F. The controller determines whether solar heating or cooling is needed, according to the selected operating options.
Four LED indicators display control power, heating output, cooling output and sensor faults. A system test switch allows manual override of automatic operation to verify system operation.
Connections and actuator output
- Terminal-strip connections for input power and sensor inputs.
- Industry-standard 3-pin connectors for forward and reverse valve actuator operation, plus screw-terminal connectors.
- Fuse-protected 24 VAC valve output, switchable by jumper to 12 VAC for compatible older valve actuators.
- Two 10K-ohm sensors are required for operation.
Recirculation freeze protection
The field-selectable recirculation freeze-protection function turns the controller output on to direct warmer pool or spa water through the collectors when the collector sensor detects near-freezing temperatures. One or more freeze snap switches are recommended when this function is used.
Important: Consult the installation instructions before using recirculation freeze protection. The existing product information states, "The GL-235 will allow recirculation when the collector temperature rises to 42°F." Confirm the precise operating sequence in the installation instructions before configuring this function.
Controller dimensions
8 inches high × 6 inches wide × 4 inches deep.
Est. 4-6 business days for delivery.
-
Free Shipping On orders over $75
-
30-Day Returns Easy return policy
-
Amazing Support Monday – Friday



Key Features
- Differential temperature control for solar heating of pools, spas, and hot tubs
- Provides differential temperature control with an adjustable temperature limit
- Selectable automatic nocturnal cooling
- Recirculation freeze protection
- Controls a 24VAC automatic valve actuator
- High voltage output for controlling a filter pump or booster pump