PoolRx+ Black/White (with silver) Discounted Bulk Pricing - Comes not packaged

Active Ingredients: • Copper Sulphate Pentahydrate: 86.85% • Zinc Sulfate Monohydrate: 1.51% • Silver Nitrate: 0.40% • Other Ingredients: 11.24%

Directions for use:

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

• Clean or backwash your filter before adding PoolRx and remove all debris from skimmer and pump basket.
• Place the PoolRx+ pool unit into Pump Basket or Skimmer. Ideally place in pump basket for increased water flow.
• The PoolRx+ pool unit should be added to the pool when the pump has at least 3 to 4 hours left on runcycle. This will ensure the granular completely dissolves out of the unit and through the filter into the pool.
• Pump should run during the heat of the day.
• Your pool should turn over its total volume of water at least 1.5 times per day. Generally, this will require 6 to 8 hours of pump runtime depending on gallons of water and pump flow rate. Do not re-clean or backwash filter for at least 2 weeks after PoolRx+ pool unit is installed so granular can dissolve through the filter, whether it is a cartridge, D.E. or sand filter.